IMDS Recommendation can be found after login into IMDS System in section Help. The flow of data through IMDS using companies must reflect flow of materials and components through the automotive supply chain. Material data are passed along the supply chain from the very first sub supplier to the automobile manufacturer. Please note the options: 'Read-Only User', 'Regular User' and 'Enterprise Administrator' and make your choice according to your demands as the three roles have different access permissions from small to large. Please refer to User Manual to know about their specific difference. You can also add department for your new user. 7.How do OEMs join. Please get regularly informed on the IMDS News page about upcoming changes in IMDS.IMDS News page about upcoming changes in IMDS.
Integrated Maintenance Data System Imds
Imds User Guide
Isuzu IMDS
(International Material Data System)
Instruction Manual Version 5.1 2009/08
[CONTENTS]
page
About the Isuzu IMDS Instruction Manual ................................................................................................... 2 1. Outline from Request to Completion of Acceptance............................................................................... 2 2. Basic Points Common to Creating and Sending of MDS....................................................................... 3 3. Entry of Ingredients................................................................................................................................. 4 4. Correction of MDS.................................................................................................................................... 6 5. Sending of MDS........................................................................................................................................ 7 6. FAQ (Frequently Asked Questions) ........................................................................................................ 8 7. Contacts for Inquiries About the IMDS .................................................................................................. 9 Attached document Key Points of Creation of Material Datasheet (MDS) ............................................. 10
1/13
About the Isuzu IMDS Instruction Manual Purpose: In order to understand the environmental impact of products, Isuzu collects material and chemical substance information on it by IMDS. For this information, Isuzu will make requests to suppliers to send the required Material Datasheet (MDS) into IMDS. This manual explains how to create and send an appropriate MDS. About this revision: It has been six years since IMDS was introduced to Isuzu. Suppliers had some unclear points in how to create MDS at first, however are used to create and send MDS now. And almost all the entry of information peculiar to Isuzu at that time has become mandatory in IMDS. The revision at this time places an emphasis on the manner of operating the IMDS rather than on the method of creating individual MDS. The name was also changed from previous “Isuzu IMDS Instructions” to “Isuzu IMDS Instruction Manual.”
1.
Outline from Request to Completion of Acceptance
There are several steps taken in order to get complete MDS acceptance. Fig. 1 shows the process flow from receiving a request for MDS to completing MDS acceptance at Isuzu. Fig.-1
Process Flow from request to completion of acceptance
Request based on
Request by writing
Request by any
the request list
on a drawing, etc.
other methods
Requested supplier Confirm request Create MDS Notification
Send MDS to Isuzu
Isuzu checks the contents of MDS
Determination
of result
Request for
Notification of
correction
acceptance
NG
OK
Completion of acceptance
1.1 IMDS Process Flow overview Isuzu will make a request to create and send MDS using one of the following methods in Table-1. Table-1 How a request is made for sending MDS Request based on the request list. How a request Request according to the drawing instructions by ISC-A00-008Y for one of the is made for drawing characteristics data. sending MDS Request by any other method.
Upon receiving a request, the supplier should create MDS and send it at the appropriate time. For creating MDS and sending MDS please read Section 2, 3, and 5 of this manual. When MDS is received, Isuzu will check and judge whether it is “accepted” or “rejected”. Each time an MDS is checked, the supplier will receive an e-mail notification of the result. For any MDS that is “rejected”, Isuzu will clearly state what should be corrected and how to correct it in our result notification e-mail. Please make necessary corrections by referring to this notification.
2/13
2.
Basic Points Common to Creating and Sending of MDS 2.1
Part Number, Description, Supplier Code, Datasheet Type, and Data Acceptance Completion Time Limit When MDS was requested from Isuzu, suppliers should create using part number, description, supplier code, and datasheet type as specified and to send it in advance so that it will be accepted before acceptance completion time limit as specified. In case these items are not specified, suppliers should create and send MDS according to Table-2 and Table-3.
Table-2 Part number, description, supplier code, datasheet type and data acceptance time limit Item
When Isuzu specified using the request list
Part number
How to handle each item if not specified by Isuzu Use Isuzu’s part number by part. (Drawing number unacceptable)
Description
Use Isuzu’s part name written on the drawing. *See Note
Supplier code All as specified
Use the supplier code of the supplier delivering the relevant part or material to Isuzu.Example: Tier 2 supplier needs to input Tier 1 supplier code.
Datasheet type
Select datasheet type from Table-3.
Data acceptance completion time limits
For a drawing with the statement “The restricted or reportable substances for parts shall be as specified in ISC-A00-008Y”, the acceptance completion time limit is prior to the delivery of initial parts in mass production.
*Note: Be sure to enter RH, LH, FT or RR indicating the mounting position of the relevant part, if written.
Table-3 Selection of data sheet type
2.2
2.3
Form of a part delivered to Isuzu Motors
Datasheet type
Complete assembly, Component
Component
Casting/Forging blanks, Semi-finished product
Semi-Component
Material, Quasi-direct material
Material
IMDS Recommendations The MDS to be sent to Isuzu should be created according to the latest IMDS recommendation in principle. The IMDS Recommendations are displayed by clicking “Recommendation” on the left side in the main menu after login on the IMDS. Module ID 2.3.1 How to use module ID A module ID must be used only for one part number. If the suffix is changed due to design change, etc., please change module ID to new one, do not use the module ID used before the change. MDS are managed by module ID at Isuzu. If the same module ID is applied to MDS with different part numbers, it causes confusion in managing MDS. This rule should be strictly observed. 2.3.2 Module ID for correction data When correcting MDS, a new version must be created with the same module ID as a rule.
3/13
2.4
MDS of Parts / Materials Supplied by Isuzu 2.4.1 Creation of MDS using the MDS of parts / materials supplied by Isuzu If any MDS of an Isuzu-supplied parts or Isuzu-supplied materials are required for creating your MDS, please check if you have already received the MDS from Isuzu. If the received MDS is old or is information required missing, please contact Isuzu by using the sheet already delivered to suppliers from the Purchasing Operations Dept. of Isuzu. We will send you the current MDS Isuzu accepted. Please create your MDS by using it. 2.4.2 Materials supplied by Isuzu If the chemical composition of an Isuzu-supplied material is defined in public norm or standards and the material corresponds to those in the published MDS by the IMDS-Committee, IMDS-Committee / ILI Metals or Stahl und Eisen Liste, please use the published MDS.
2.5
MDS for Public Standard Materials If a public standard material corresponds to those in the published MDS by the IMDS-Committee, IMDS-Committee / ILI Metals, or Stahl und Eisen Liste, please use the published MDS.
2.6
Creation and Sending of multiple MDS with Similar Component Information For multiple MDS, please create, send one representative MDS, and complete acceptance. Then create and send the remaining MDS by referring to the accepted MDS. To avoid requiring the same correction for multiple MDS, please do not send all data at one time. This also delays completion of acceptance.
2.7
Contact Person Isuzu inquire the Contact Person in supplier data about the contents of MDS. The client manager of each supplier should periodically check if the information of the contact person is updated with the most recent information.
3.
Entry of Ingredients 3.1
Material Please enter fields in details on ingredients of a Material according to Table-4 on the next page.
3.2
Adding Basic Substances to Material When adding basic substances to Material, please enter fields in details on ingredients of basic substances according to Table-5 on the next page.
3.3
Semi-component Please enter fields in details on ingredients of a Semi-component according to Table-6 on the next page.
4/13
Table-4 Input items for ingredients of Material Symbol for necessity of input {: Essential ∆: Essential on condition Blank: Optional Field Name
Necessity of Input
Name
{
Trade name
∆
When sending Material
Symbol
∆
For resin and rubber A symbol specified in ISO1043, 1629, 18064 or a symbol materials specified in public standards
Classification
{
Norms/Standards
∆
Input Condition
Instruction for Input A symbol specified in public standards or the name defining a material Enter a trade name as specified by Isuzu.
Internal Mat.-No. Std. Mat.-No.
When applicable to public standards
Inhouse Norms Supplier Remark Development Sample Report When adding Material to Component or Semi-component, enter recyclate information or applications. Does the material contain recyclate? Content of post industrial recyclate Content of post consumer recyclate: Applications
∆ ∆ ∆ ∆
Containing recyclate Select “Yes” (the default value is “No”). Containing the recyclate in question Containing the recyclate in question Required by the system
Enter the content of post industrial recyclate by two range values. Enter the content of post consumer recyclate by two range values. Select an applicable application code.
Table-5 Input items for ingredients of Basic substances Symbol for necessity of input {: Essential Blank: Optional Field Name
Necessity of Input
Input Condition
The total contents of confidential substances and Wild cards in a material.does not exceed 10%. Enter a range value or fixed value or specify it as the remnant.
Confidential Portion
Instruction for Input
{
Table-6 Input items for ingredients of Semi-component Symbol for necessity of input {: Essential Blank: Optional Field Name
Necessity of Input
Description
{
Part name used by supplier is acceptable. *See Note
Part/Item No.
{
Part number used by supplier is acceptable. *See Note
Input Condition
Instruction for Input
Development Sample Report *Note Writing Part/Item No. and Description: Be sure to enter part number and description for company data of Recipient data according to Section 2.1 in this manual when sending MDS. If the MDS is not correctly written, it will be “rejected.”
5/13
3.4
Component Enter fields in details on ingredients of a Component according to Table-7. 3.4.1 Quantity of sub-parts (Sub-category) When adding Component as sub-parts to other Component, please correctly enter the quantity of sub-parts in the quantity field in the detail of ingredients for sub-parts. 3.4.2 Parts Marking information for Component containing resin and rubber materials When adding Material containing resin and rubber to the Component, please answer the Parts Marking question in the ingredients of the Component. For the MDS to be sent to Isuzu, it is essential to answer the question even if the mass of the component data in question is 25 grams or under.
Table-7 Input items for ingredients of Component Symbol for necessity of input {: Essential ∆: Essential on condition Blank: Optional Field Name
Necessity of Input
Description
{
Part name used by supplier is acceptable. *See Note
Part/Item No.
{
Part number used by supplier is acceptable. *See Note
Measured Weight per Item
{
Measured value (designed value also acceptable)
Tolerance
{
Input Condition
Instruction for Input
Calculated Weight per Item Deviation
Development Sample Report
When added to other Component, entry of quantity of Components as sub-parts is required. Quantity
∆
Added to other Component
When material data containing resin and rubber is added, entry of Parts Marking information is required. Polymeric parts marked
∆
Select the answer about Parts Marking information Containing resin and regardless of the mass of the component data in rubber materials question.
*Note Writing Part/Item No. and Description: Be sure to enter part number and description for company data of Recipient data according to Section 2.1 in this manual when sending MDS. If the MDS is not correctly written, it will be “rejected.”
4.
Correction of MDS 4.1
Correction of MDS If MDS is rejected, Isuzu will inform supplier of the reason by e-mail. Please immediately check the reason, correct it, and send the modified MDS to Isuzu.
4.2
Acceptance Completion Time Limit for Correction MDS After being rejected, the modified MDS should be promptly sent to Isuzu for acceptance.
6/13
5.
Sending of MDS 5.1
Recipient of MDS When sending an MDS to Isuzu, please specify the IMDS Company ID of the recipient as 2 2 3 4 9.
5.2
Entry of Company Data of Recipient Data 5.2.1 Entry of part number, description, and supplier Code “Part/Item No.”, “Description”, and “Supplier Code” should be correctly entered in the respective fields for company data of recipient information. If they are incorrect, the Component will not be recognized as a valid Isuzu part and the MDS will be “rejected.” 5.2.2 Forwarding allowed “Forwarding allowed” tick box has to be left “Yes” as it is. 5.2.3 Sending of Material When sending a Material, it is necessary to fill in the “Internal Mat.-No.” and “Name” fields as we requested. (See Fig.-3) 5.2.4 Other items Any items other than the above are optional unless particularly requested by Isuzu. Fig.-2 Entry of company data
Fig.-3 Entry of company data
(For Component and Semi-component)
(For Material)
Isuzu Motors Limited 22349
Isuzu Motors Limited 22349
Essential Essential
Essential
Essential
Essential
Essential
Leave 'Yes' as it is
Leave 'Yes' as it is
7/13
6.
FAQ (Frequently Asked Questions)
Q1. A1.
Q2. A2. 1) 2) 3)
I cannot create MDS and complete acceptance within two months after request of sending data.” IMDS has now become an environment responsive tool in common used. Most of the suppliers start collecting MDS of materials and component parts or equivalent information from the preproduction stage of components and are always prepared for the sending of MDS for parts and materials to be delivered to Isuzu. They seldom start collecting the MDS and the information after receiving request for MDS as in the past. Please be always prepared to send MDS as a routine task. The sub-tier supplier would not disclose some chemical substances of a material that compose the part for confidentiality reasons. Please explain the following rules to the sub-tier supplier. Entry of all the names of sub-parts and materials forming the part is mandatory as a rule. It is not necessary to disclose 100% of chemical substances that compose each material. When making chemical substances undisclosed because of confidentiality, nondisclosure is possible within a limitation of 10% for each material. However, the prohibited substances and the substances to be declared in the GADSL cannot be made undisclosed. The above are basic rules for IMDS and are internationally performed in the automobile industry.
Q3.
The person in charge of our IMDS service or the relevant part that are registered in Isuzu, was changed. Please tell us how to change contacts such as telephone number and e-mail address. A3. If the person in charge of the IMDS data, the relevant part, or your e-mail address was changed, please notify Isuzu of the change by e-mail, etc. Isuzu will send the form for entry of the changed contents to you. Please fill out this form and return it to Isuzu.
Q4. A4.
I do not know how to operate IMDS system. For a question about how to operate the IMDS system, please contact the IMDS Service Center. For a concrete description of each operating procedure, see the IMDS User Manual. (Refer to Section 7.1 in this manual.)
Q5. A5.
Questions about troubles with IMDS system such as “The password has been locked” For any trouble with IMDS system, refer to the IMDS User Manual describing ways of dealing with troubles or contact the IMDS Service Center. (Refer to Section 7.1 in this manual.)
Q6. A6.
I sent MDS to Isuzu, but it was rejected. How can I know the reason? Isuzu will send an e-mail notifying of the (check) result to suppliers. Please confirm the specific reason and the correction procedure. (Refer to Section 1 and Section 4.1 in this manual.)
Q7. A7.
I have sent modified MDS. Please let me know if the MDS that has an error can be left as it is? After you correct the MDS and send it, please delete the wrong MDS within the day. Also, please check that the status of the deleted MDS has turned to “cbs” (Cancelled by the sender).
Q8.
I corrected part number in MDS and sent it to Isuzu, but it was rejected. The reason was wrong part number. Please let me know how to correct it. Please correct the part number of the company data for recipient data. (Refer to Section 5.2.1 in this manual.)
A8.
8/13
7.
Contacts for Inquiries About the IMDS 7.1
Operation Procedures for Log-on and Data Creation/Correction/Sending with the IMDS System (Table 8)
Information on the IMDS system in general Public IMDS Pages
www.mdsystem.com
Various kinds of material for the IMDS system Material name
URL
IMDS Training Guide (Japanese) www.mdsystem.com/html/ja/faq_train_20030809_ja.htm IMDS Handbook (Japanese) IMDS User Manual
www.mdsystem.com/html/data/training_en_6.0.pdf
IMDS Service Centers in the world Area
Telephone number
Office hours
E-mail address
Japan
+81-3-5349-7010
9:00am - 5:00pm (GMT+9) (Except Saturdays, Sundays and Holidays)
[email protected]
Korea
+82-2-2199-0203,-0204
9:00am - 5:00pm (GMT+9) (Except Saturdays, Sundays and Holidays)
[email protected]
China
+86-27-87431668
9:30am - 12:30pm, 1:30pm - 5:00pm (GMT+8) (Except Saturdays, Sundays and Holidays)
[email protected]
Europe
+36-1-298-1536
8:00am - 4:30pm (GMT+1) (Except Saturdays, Sundays)
[email protected]
France
+33-1-55-69-7860
Same as in Europe
Same as in Europe
America
+1-972-403-3607
8:00am - 5:00pm (CST) Saturdays, Sundays)
7.2
(Except
imd[email protected]
Isuzu Motors Ltd. (Table 9)
Content of inquiry Content of request for data transmission Delivery parts Parts supplied by Isuzu Person in charge of IMDS at you Items concerning a change, etc. Items concerning this instruction manual in general Input method for metal materials Input method for materials other than metals
Telephone number
Facsimile
Norikazu Kawai Purchasing Operations Dept.
0466-45-9397
0466-45-9493
Masami Niikura Compliance & Certification Dept. Yuichiro Hara Vehicle Research & Experiment Dept. Soichi Takahashi Vehicle Research & Experiment Dept.
0466-45-2078
0466-45-2499
0466-45-2045
0466-45-6954
0466-45-2682
0466-45-2676
Person in charge
E-mail address
[email protected]
9/13
[email protected]
Attached document 1.
Key Points of Creation of Material Datasheet (MDS)
“Supplier Code', 'Part Number.', “Description”, and “Datasheet Type” Input method
When the input method is designated by Isuzu through Request List, etc., create MDS according to the designated data sheet type and please make sure that necessary information is inputted according to the direction from us into the items of the “Company data”, which is to be inputted when sending MDS.
Company data
Request List
Fig. 4 Company data
BRRCKET ASM;TANK
1000 Isuzu Motors Limited 22349
Designated datasheet type
As for the data we have requested you to send, please input the data according to the Request List attached to the “E-mail of data sending request”.
Note
“Supplier/Maker Code” For a request made by Isuzu Motors Limited, use the Isuzu supplier code specified by a 4-digit serial number, please. Requests made by Isuzu Motors America Inc., Isuzu Motors Company Thailand, etc. will be different than Isuzu Motors Limited.
Note
“Part/Item No.” A “Part/Item No.” is specified by a 10-digit serial number. (Please don’t use space, hyphen, slash, dash, etc.)
Note
“Description” As for a part requested as one of the complete characteristics data of the drawing based on the drawing direction of ISC-A00-008Y or a part not included in the request by Isuzu, enter the part name described in the drawing. Furthermore, be sure to input the description of the difference in the mounting position of the relevant part (RH/LH, FT/RR, etc.).
Note
Datasheet Type If not specified, select one of the three data sheet types shown in the table-10 below according to the form of a part delivered to Isuzu. Refer to Section 3.2.2.1 for Component, Section 3.3.2 for Semi-Component, and Section 3.4.2 for Material in IMDS Recommendation 001. Table-10 Selection of datasheet type Form of a part delivered to Isuzu Motors
Datasheet type
Complete assembly, Component
Component
Casting/Forging blanks, Semi-finished product
Semi-Component
Material, Quasi-direct material
Material
10/13
2.
Recyclate information, Parts Marking information
Note
There are new information items to be inputted after the creation of the relevant MDS. Follow the method below when using the MDS created in the past when creating new MDS and sufficiently confirm that there is no omission with the information items. As for Parts Marking information: Note ¾ It is necessary even for objects with mass of 25 g or less. ¾ It is necessary for all Component, which the Material including of rubber/plastic materials is directly attached to as sub-category. (It is also necessary for subparts) To confirm the existence of recyclate information and Parts Marking Confirmation method Preview information, search MDS, and click the button. Select “Browser Page” under the ”Report format”. Then click the button to display “MDS Report” and confirm the Continue existence of recyclate information and Parts Marking information.” The figure shown below is an example in which data is not inputted in “Recyclate information” and “Parts Marking information.” Fig. 5 Confirmation method of Recyclate Information and Parts Marking Information
DATA SHEET Preview
DATA SHEET Preview
DATASHEET Report 818*****/1.00 COVER 898******* 142 [g]
Click here
898******* SEAL
SEAL
8 1 8 * * * * * / 1 (No de ID 8 1 8 * * * * * )
898*******
818***** / 1
EPDM
ADHESIVES
There is no 'Marking information of polymeric parts' There is no 'Recyclate information'
11/13
3.
Recommendation 001 3.5.2.
Other chemical substances (Wild Card)
Note
Note
“Wild Card”: The total contents of chemical substances included in the Wild Card such as Misc, not to declare, Pigment portion, not to declare, etc. should be limited to 10% or less for each Material. “Confidential Substances”: The total content of Basic substances included in the “Confidential Substances” should be limited to 10% or less for each Material.
Note
“Wild Card+Confidential Substances”: The total content of Basic substances included in the “Wild Card+Confidential Substances” should be limited to 10% or less for each Material .
Note
On condition that the above limitation is observed, please disclose 90% or more of the “Basic substances” specifically for each Material.
4.
Data Tree Structure
Note
Place the same type of data on a given data level in the data tree. Recommendation 001 3.5.2. Fig. 6
Positive example (left) and negative example (right) VALVE ASM
COVER ASM
VALVE ASM
Mixture of different data type
Structure okay
Structure is wrong Same type of data
Same type of data
CABLE COPPER
CONTROLLER PCB TERMINAL
Same type of data
Mixture of different data type
PLATE
Note
Note
Mixture of different data type
Use “Semi-Component ” for only “Semi-finished product.” IMDS Recommendation 001 3.3.2 When the “Semi-finished product” is processed and the mass is clearly defined, make the “Component ” as the processed Semi-finished product and attach the Semi-Component as a sub-category to the Component. Fig. 7
Positive example (left) and negative example (right)
Structure okay
Structure is wrong
The Semi-Component is attached to the Component
The Component is composed of the Semi-Component.
12/13
5.
IMDS Recommendation 001 3.4.2
Material of Coatings/Adhesives
Note
Create MDS in a state of completed product at the time of delivery, please.
Note
Do not write any solvents not included in completed product, please. The negative example is shown in Fig.8. Do not use the copy chemical substances written in MSDS (Material Safety Data Sheet) that suppliers gain from material makers, please. Do not describe materials or chemical substances that may be subjected to chemical reaction, changed into polymers and not left in the completed product at the time of delivery.
Note
Fig. 8
Negative example
Unacceptable since they are solvents
6.
Tree Structure of Labels/Seals Note
In the case of printed products such as LABEL, a Component as “LABEL” should consist of Components as sub-parts which are classified into “Ink,” “Base,” “Adhesive,” “Coating,” etc, and Materials with appropriate name should be attached to each Component. A Component as “LABEL” may consist of Materials which are classified into “Ink,” “Base,” “Adhesive,” “Coating,” etc. Fig. 9
Positive example
Sample of structure for LABEL -
7.
・ LABEL
-
LABEL Acrylic adhesive
・ LABEL
+
Adhesives
+
+
+
Coating
+
+
+
Ink
+
+
+
Base
+
+
Adhesives Coating Ink
POLYESTE
Structure okay
Paper INK POLYESTE
Base
Names of Material Data
IMDS Recommendation 001 3.4.2
Note
For name of material, use names as defined in the public norm or standards, please. The name of material must specify the material.
Note
For name of material, don’t use part name or commodity (trade) name, please.
13/13
(International Material Data System)
Instruction Manual Version 5.1 2009/08
[CONTENTS]
page
About the Isuzu IMDS Instruction Manual ................................................................................................... 2 1. Outline from Request to Completion of Acceptance............................................................................... 2 2. Basic Points Common to Creating and Sending of MDS....................................................................... 3 3. Entry of Ingredients................................................................................................................................. 4 4. Correction of MDS.................................................................................................................................... 6 5. Sending of MDS........................................................................................................................................ 7 6. FAQ (Frequently Asked Questions) ........................................................................................................ 8 7. Contacts for Inquiries About the IMDS .................................................................................................. 9 Attached document Key Points of Creation of Material Datasheet (MDS) ............................................. 10
1/13
About the Isuzu IMDS Instruction Manual Purpose: In order to understand the environmental impact of products, Isuzu collects material and chemical substance information on it by IMDS. For this information, Isuzu will make requests to suppliers to send the required Material Datasheet (MDS) into IMDS. This manual explains how to create and send an appropriate MDS. About this revision: It has been six years since IMDS was introduced to Isuzu. Suppliers had some unclear points in how to create MDS at first, however are used to create and send MDS now. And almost all the entry of information peculiar to Isuzu at that time has become mandatory in IMDS. The revision at this time places an emphasis on the manner of operating the IMDS rather than on the method of creating individual MDS. The name was also changed from previous “Isuzu IMDS Instructions” to “Isuzu IMDS Instruction Manual.”
1.
Outline from Request to Completion of Acceptance
There are several steps taken in order to get complete MDS acceptance. Fig. 1 shows the process flow from receiving a request for MDS to completing MDS acceptance at Isuzu. Fig.-1
Process Flow from request to completion of acceptance
Request based on
Request by writing
Request by any
the request list
on a drawing, etc.
other methods
Requested supplier Confirm request Create MDS Notification
Send MDS to Isuzu
Isuzu checks the contents of MDS
Determination
of result
Request for
Notification of
correction
acceptance
NG
OK
Completion of acceptance
1.1 IMDS Process Flow overview Isuzu will make a request to create and send MDS using one of the following methods in Table-1. Table-1 How a request is made for sending MDS Request based on the request list. How a request Request according to the drawing instructions by ISC-A00-008Y for one of the is made for drawing characteristics data. sending MDS Request by any other method.
Upon receiving a request, the supplier should create MDS and send it at the appropriate time. For creating MDS and sending MDS please read Section 2, 3, and 5 of this manual. When MDS is received, Isuzu will check and judge whether it is “accepted” or “rejected”. Each time an MDS is checked, the supplier will receive an e-mail notification of the result. For any MDS that is “rejected”, Isuzu will clearly state what should be corrected and how to correct it in our result notification e-mail. Please make necessary corrections by referring to this notification.
2/13
2.
Basic Points Common to Creating and Sending of MDS 2.1
Part Number, Description, Supplier Code, Datasheet Type, and Data Acceptance Completion Time Limit When MDS was requested from Isuzu, suppliers should create using part number, description, supplier code, and datasheet type as specified and to send it in advance so that it will be accepted before acceptance completion time limit as specified. In case these items are not specified, suppliers should create and send MDS according to Table-2 and Table-3.
Table-2 Part number, description, supplier code, datasheet type and data acceptance time limit Item
When Isuzu specified using the request list
Part number
How to handle each item if not specified by Isuzu Use Isuzu’s part number by part. (Drawing number unacceptable)
Description
Use Isuzu’s part name written on the drawing. *See Note
Supplier code All as specified
Use the supplier code of the supplier delivering the relevant part or material to Isuzu.Example: Tier 2 supplier needs to input Tier 1 supplier code.
Datasheet type
Select datasheet type from Table-3.
Data acceptance completion time limits
For a drawing with the statement “The restricted or reportable substances for parts shall be as specified in ISC-A00-008Y”, the acceptance completion time limit is prior to the delivery of initial parts in mass production.
*Note: Be sure to enter RH, LH, FT or RR indicating the mounting position of the relevant part, if written.
Table-3 Selection of data sheet type
2.2
2.3
Form of a part delivered to Isuzu Motors
Datasheet type
Complete assembly, Component
Component
Casting/Forging blanks, Semi-finished product
Semi-Component
Material, Quasi-direct material
Material
IMDS Recommendations The MDS to be sent to Isuzu should be created according to the latest IMDS recommendation in principle. The IMDS Recommendations are displayed by clicking “Recommendation” on the left side in the main menu after login on the IMDS. Module ID 2.3.1 How to use module ID A module ID must be used only for one part number. If the suffix is changed due to design change, etc., please change module ID to new one, do not use the module ID used before the change. MDS are managed by module ID at Isuzu. If the same module ID is applied to MDS with different part numbers, it causes confusion in managing MDS. This rule should be strictly observed. 2.3.2 Module ID for correction data When correcting MDS, a new version must be created with the same module ID as a rule.
3/13
2.4
MDS of Parts / Materials Supplied by Isuzu 2.4.1 Creation of MDS using the MDS of parts / materials supplied by Isuzu If any MDS of an Isuzu-supplied parts or Isuzu-supplied materials are required for creating your MDS, please check if you have already received the MDS from Isuzu. If the received MDS is old or is information required missing, please contact Isuzu by using the sheet already delivered to suppliers from the Purchasing Operations Dept. of Isuzu. We will send you the current MDS Isuzu accepted. Please create your MDS by using it. 2.4.2 Materials supplied by Isuzu If the chemical composition of an Isuzu-supplied material is defined in public norm or standards and the material corresponds to those in the published MDS by the IMDS-Committee, IMDS-Committee / ILI Metals or Stahl und Eisen Liste, please use the published MDS.
2.5
MDS for Public Standard Materials If a public standard material corresponds to those in the published MDS by the IMDS-Committee, IMDS-Committee / ILI Metals, or Stahl und Eisen Liste, please use the published MDS.
2.6
Creation and Sending of multiple MDS with Similar Component Information For multiple MDS, please create, send one representative MDS, and complete acceptance. Then create and send the remaining MDS by referring to the accepted MDS. To avoid requiring the same correction for multiple MDS, please do not send all data at one time. This also delays completion of acceptance.
2.7
Contact Person Isuzu inquire the Contact Person in supplier data about the contents of MDS. The client manager of each supplier should periodically check if the information of the contact person is updated with the most recent information.
3.
Entry of Ingredients 3.1
Material Please enter fields in details on ingredients of a Material according to Table-4 on the next page.
3.2
Adding Basic Substances to Material When adding basic substances to Material, please enter fields in details on ingredients of basic substances according to Table-5 on the next page.
3.3
Semi-component Please enter fields in details on ingredients of a Semi-component according to Table-6 on the next page.
4/13
Table-4 Input items for ingredients of Material Symbol for necessity of input {: Essential ∆: Essential on condition Blank: Optional Field Name
Necessity of Input
Name
{
Trade name
∆
When sending Material
Symbol
∆
For resin and rubber A symbol specified in ISO1043, 1629, 18064 or a symbol materials specified in public standards
Classification
{
Norms/Standards
∆
Input Condition
Instruction for Input A symbol specified in public standards or the name defining a material Enter a trade name as specified by Isuzu.
Internal Mat.-No. Std. Mat.-No.
When applicable to public standards
Inhouse Norms Supplier Remark Development Sample Report When adding Material to Component or Semi-component, enter recyclate information or applications. Does the material contain recyclate? Content of post industrial recyclate Content of post consumer recyclate: Applications
∆ ∆ ∆ ∆
Containing recyclate Select “Yes” (the default value is “No”). Containing the recyclate in question Containing the recyclate in question Required by the system
Enter the content of post industrial recyclate by two range values. Enter the content of post consumer recyclate by two range values. Select an applicable application code.
Table-5 Input items for ingredients of Basic substances Symbol for necessity of input {: Essential Blank: Optional Field Name
Necessity of Input
Input Condition
The total contents of confidential substances and Wild cards in a material.does not exceed 10%. Enter a range value or fixed value or specify it as the remnant.
Confidential Portion
Instruction for Input
{
Table-6 Input items for ingredients of Semi-component Symbol for necessity of input {: Essential Blank: Optional Field Name
Necessity of Input
Description
{
Part name used by supplier is acceptable. *See Note
Part/Item No.
{
Part number used by supplier is acceptable. *See Note
Input Condition
Instruction for Input
Development Sample Report *Note Writing Part/Item No. and Description: Be sure to enter part number and description for company data of Recipient data according to Section 2.1 in this manual when sending MDS. If the MDS is not correctly written, it will be “rejected.”
5/13
3.4
Component Enter fields in details on ingredients of a Component according to Table-7. 3.4.1 Quantity of sub-parts (Sub-category) When adding Component as sub-parts to other Component, please correctly enter the quantity of sub-parts in the quantity field in the detail of ingredients for sub-parts. 3.4.2 Parts Marking information for Component containing resin and rubber materials When adding Material containing resin and rubber to the Component, please answer the Parts Marking question in the ingredients of the Component. For the MDS to be sent to Isuzu, it is essential to answer the question even if the mass of the component data in question is 25 grams or under.
Table-7 Input items for ingredients of Component Symbol for necessity of input {: Essential ∆: Essential on condition Blank: Optional Field Name
Necessity of Input
Description
{
Part name used by supplier is acceptable. *See Note
Part/Item No.
{
Part number used by supplier is acceptable. *See Note
Measured Weight per Item
{
Measured value (designed value also acceptable)
Tolerance
{
Input Condition
Instruction for Input
Calculated Weight per Item Deviation
Development Sample Report
When added to other Component, entry of quantity of Components as sub-parts is required. Quantity
∆
Added to other Component
When material data containing resin and rubber is added, entry of Parts Marking information is required. Polymeric parts marked
∆
Select the answer about Parts Marking information Containing resin and regardless of the mass of the component data in rubber materials question.
*Note Writing Part/Item No. and Description: Be sure to enter part number and description for company data of Recipient data according to Section 2.1 in this manual when sending MDS. If the MDS is not correctly written, it will be “rejected.”
4.
Correction of MDS 4.1
Correction of MDS If MDS is rejected, Isuzu will inform supplier of the reason by e-mail. Please immediately check the reason, correct it, and send the modified MDS to Isuzu.
4.2
Acceptance Completion Time Limit for Correction MDS After being rejected, the modified MDS should be promptly sent to Isuzu for acceptance.
6/13
5.
Sending of MDS 5.1
Recipient of MDS When sending an MDS to Isuzu, please specify the IMDS Company ID of the recipient as 2 2 3 4 9.
5.2
Entry of Company Data of Recipient Data 5.2.1 Entry of part number, description, and supplier Code “Part/Item No.”, “Description”, and “Supplier Code” should be correctly entered in the respective fields for company data of recipient information. If they are incorrect, the Component will not be recognized as a valid Isuzu part and the MDS will be “rejected.” 5.2.2 Forwarding allowed “Forwarding allowed” tick box has to be left “Yes” as it is. 5.2.3 Sending of Material When sending a Material, it is necessary to fill in the “Internal Mat.-No.” and “Name” fields as we requested. (See Fig.-3) 5.2.4 Other items Any items other than the above are optional unless particularly requested by Isuzu. Fig.-2 Entry of company data
Fig.-3 Entry of company data
(For Component and Semi-component)
(For Material)
Isuzu Motors Limited 22349
Isuzu Motors Limited 22349
Essential Essential
Essential
Essential
Essential
Essential
Leave 'Yes' as it is
Leave 'Yes' as it is
7/13
6.
FAQ (Frequently Asked Questions)
Q1. A1.
Q2. A2. 1) 2) 3)
I cannot create MDS and complete acceptance within two months after request of sending data.” IMDS has now become an environment responsive tool in common used. Most of the suppliers start collecting MDS of materials and component parts or equivalent information from the preproduction stage of components and are always prepared for the sending of MDS for parts and materials to be delivered to Isuzu. They seldom start collecting the MDS and the information after receiving request for MDS as in the past. Please be always prepared to send MDS as a routine task. The sub-tier supplier would not disclose some chemical substances of a material that compose the part for confidentiality reasons. Please explain the following rules to the sub-tier supplier. Entry of all the names of sub-parts and materials forming the part is mandatory as a rule. It is not necessary to disclose 100% of chemical substances that compose each material. When making chemical substances undisclosed because of confidentiality, nondisclosure is possible within a limitation of 10% for each material. However, the prohibited substances and the substances to be declared in the GADSL cannot be made undisclosed. The above are basic rules for IMDS and are internationally performed in the automobile industry.
Q3.
The person in charge of our IMDS service or the relevant part that are registered in Isuzu, was changed. Please tell us how to change contacts such as telephone number and e-mail address. A3. If the person in charge of the IMDS data, the relevant part, or your e-mail address was changed, please notify Isuzu of the change by e-mail, etc. Isuzu will send the form for entry of the changed contents to you. Please fill out this form and return it to Isuzu.
Q4. A4.
I do not know how to operate IMDS system. For a question about how to operate the IMDS system, please contact the IMDS Service Center. For a concrete description of each operating procedure, see the IMDS User Manual. (Refer to Section 7.1 in this manual.)
Q5. A5.
Questions about troubles with IMDS system such as “The password has been locked” For any trouble with IMDS system, refer to the IMDS User Manual describing ways of dealing with troubles or contact the IMDS Service Center. (Refer to Section 7.1 in this manual.)
Q6. A6.
I sent MDS to Isuzu, but it was rejected. How can I know the reason? Isuzu will send an e-mail notifying of the (check) result to suppliers. Please confirm the specific reason and the correction procedure. (Refer to Section 1 and Section 4.1 in this manual.)
Q7. A7.
I have sent modified MDS. Please let me know if the MDS that has an error can be left as it is? After you correct the MDS and send it, please delete the wrong MDS within the day. Also, please check that the status of the deleted MDS has turned to “cbs” (Cancelled by the sender).
Q8.
I corrected part number in MDS and sent it to Isuzu, but it was rejected. The reason was wrong part number. Please let me know how to correct it. Please correct the part number of the company data for recipient data. (Refer to Section 5.2.1 in this manual.)
A8.
8/13
7.
Contacts for Inquiries About the IMDS 7.1
Operation Procedures for Log-on and Data Creation/Correction/Sending with the IMDS System (Table 8)
Information on the IMDS system in general Public IMDS Pages
www.mdsystem.com
Various kinds of material for the IMDS system Material name
URL
IMDS Training Guide (Japanese) www.mdsystem.com/html/ja/faq_train_20030809_ja.htm IMDS Handbook (Japanese) IMDS User Manual
www.mdsystem.com/html/data/training_en_6.0.pdf
IMDS Service Centers in the world Area
Telephone number
Office hours
E-mail address
Japan
+81-3-5349-7010
9:00am - 5:00pm (GMT+9) (Except Saturdays, Sundays and Holidays)
[email protected]
Korea
+82-2-2199-0203,-0204
9:00am - 5:00pm (GMT+9) (Except Saturdays, Sundays and Holidays)
[email protected]
China
+86-27-87431668
9:30am - 12:30pm, 1:30pm - 5:00pm (GMT+8) (Except Saturdays, Sundays and Holidays)
[email protected]
Europe
+36-1-298-1536
8:00am - 4:30pm (GMT+1) (Except Saturdays, Sundays)
[email protected]
France
+33-1-55-69-7860
Same as in Europe
Same as in Europe
America
+1-972-403-3607
8:00am - 5:00pm (CST) Saturdays, Sundays)
7.2
(Except
imd[email protected]
Isuzu Motors Ltd. (Table 9)
Content of inquiry Content of request for data transmission Delivery parts Parts supplied by Isuzu Person in charge of IMDS at you Items concerning a change, etc. Items concerning this instruction manual in general Input method for metal materials Input method for materials other than metals
Telephone number
Facsimile
Norikazu Kawai Purchasing Operations Dept.
0466-45-9397
0466-45-9493
Masami Niikura Compliance & Certification Dept. Yuichiro Hara Vehicle Research & Experiment Dept. Soichi Takahashi Vehicle Research & Experiment Dept.
0466-45-2078
0466-45-2499
0466-45-2045
0466-45-6954
0466-45-2682
0466-45-2676
Person in charge
E-mail address
[email protected]
9/13
[email protected]
Attached document 1.
Key Points of Creation of Material Datasheet (MDS)
“Supplier Code', 'Part Number.', “Description”, and “Datasheet Type” Input method
When the input method is designated by Isuzu through Request List, etc., create MDS according to the designated data sheet type and please make sure that necessary information is inputted according to the direction from us into the items of the “Company data”, which is to be inputted when sending MDS.
Company data
Request List
Fig. 4 Company data
BRRCKET ASM;TANK
1000 Isuzu Motors Limited 22349
Designated datasheet type
As for the data we have requested you to send, please input the data according to the Request List attached to the “E-mail of data sending request”.
Note
“Supplier/Maker Code” For a request made by Isuzu Motors Limited, use the Isuzu supplier code specified by a 4-digit serial number, please. Requests made by Isuzu Motors America Inc., Isuzu Motors Company Thailand, etc. will be different than Isuzu Motors Limited.
Note
“Part/Item No.” A “Part/Item No.” is specified by a 10-digit serial number. (Please don’t use space, hyphen, slash, dash, etc.)
Note
“Description” As for a part requested as one of the complete characteristics data of the drawing based on the drawing direction of ISC-A00-008Y or a part not included in the request by Isuzu, enter the part name described in the drawing. Furthermore, be sure to input the description of the difference in the mounting position of the relevant part (RH/LH, FT/RR, etc.).
Note
Datasheet Type If not specified, select one of the three data sheet types shown in the table-10 below according to the form of a part delivered to Isuzu. Refer to Section 3.2.2.1 for Component, Section 3.3.2 for Semi-Component, and Section 3.4.2 for Material in IMDS Recommendation 001. Table-10 Selection of datasheet type Form of a part delivered to Isuzu Motors
Datasheet type
Complete assembly, Component
Component
Casting/Forging blanks, Semi-finished product
Semi-Component
Material, Quasi-direct material
Material
10/13
2.
Recyclate information, Parts Marking information
Note
There are new information items to be inputted after the creation of the relevant MDS. Follow the method below when using the MDS created in the past when creating new MDS and sufficiently confirm that there is no omission with the information items. As for Parts Marking information: Note ¾ It is necessary even for objects with mass of 25 g or less. ¾ It is necessary for all Component, which the Material including of rubber/plastic materials is directly attached to as sub-category. (It is also necessary for subparts) To confirm the existence of recyclate information and Parts Marking Confirmation method Preview information, search MDS, and click the button. Select “Browser Page” under the ”Report format”. Then click the button to display “MDS Report” and confirm the Continue existence of recyclate information and Parts Marking information.” The figure shown below is an example in which data is not inputted in “Recyclate information” and “Parts Marking information.” Fig. 5 Confirmation method of Recyclate Information and Parts Marking Information
DATA SHEET Preview
DATA SHEET Preview
DATASHEET Report 818*****/1.00 COVER 898******* 142 [g]
Click here
898******* SEAL
SEAL
8 1 8 * * * * * / 1 (No de ID 8 1 8 * * * * * )
898*******
818***** / 1
EPDM
ADHESIVES
There is no 'Marking information of polymeric parts' There is no 'Recyclate information'
11/13
3.
Recommendation 001 3.5.2.
Other chemical substances (Wild Card)
Note
Note
“Wild Card”: The total contents of chemical substances included in the Wild Card such as Misc, not to declare, Pigment portion, not to declare, etc. should be limited to 10% or less for each Material. “Confidential Substances”: The total content of Basic substances included in the “Confidential Substances” should be limited to 10% or less for each Material.
Note
“Wild Card+Confidential Substances”: The total content of Basic substances included in the “Wild Card+Confidential Substances” should be limited to 10% or less for each Material .
Note
On condition that the above limitation is observed, please disclose 90% or more of the “Basic substances” specifically for each Material.
4.
Data Tree Structure
Note
Place the same type of data on a given data level in the data tree. Recommendation 001 3.5.2. Fig. 6
Positive example (left) and negative example (right) VALVE ASM
COVER ASM
VALVE ASM
Mixture of different data type
Structure okay
Structure is wrong Same type of data
Same type of data
CABLE COPPER
CONTROLLER PCB TERMINAL
Same type of data
Mixture of different data type
PLATE
Note
Note
Mixture of different data type
Use “Semi-Component ” for only “Semi-finished product.” IMDS Recommendation 001 3.3.2 When the “Semi-finished product” is processed and the mass is clearly defined, make the “Component ” as the processed Semi-finished product and attach the Semi-Component as a sub-category to the Component. Fig. 7
Positive example (left) and negative example (right)
Structure okay
Structure is wrong
The Semi-Component is attached to the Component
The Component is composed of the Semi-Component.
12/13
5.
IMDS Recommendation 001 3.4.2
Material of Coatings/Adhesives
Note
Create MDS in a state of completed product at the time of delivery, please.
Note
Do not write any solvents not included in completed product, please. The negative example is shown in Fig.8. Do not use the copy chemical substances written in MSDS (Material Safety Data Sheet) that suppliers gain from material makers, please. Do not describe materials or chemical substances that may be subjected to chemical reaction, changed into polymers and not left in the completed product at the time of delivery.
Note
Fig. 8
Negative example
Unacceptable since they are solvents
6.
Tree Structure of Labels/Seals Note
In the case of printed products such as LABEL, a Component as “LABEL” should consist of Components as sub-parts which are classified into “Ink,” “Base,” “Adhesive,” “Coating,” etc, and Materials with appropriate name should be attached to each Component. A Component as “LABEL” may consist of Materials which are classified into “Ink,” “Base,” “Adhesive,” “Coating,” etc. Fig. 9
Positive example
Sample of structure for LABEL -
7.
・ LABEL
-
LABEL Acrylic adhesive
・ LABEL
+
Adhesives
+
+
+
Coating
+
+
+
Ink
+
+
+
Base
+
+
Adhesives Coating Ink
POLYESTE
Structure okay
Paper INK POLYESTE
Base
Names of Material Data
IMDS Recommendation 001 3.4.2
Note
For name of material, use names as defined in the public norm or standards, please. The name of material must specify the material.
Note
For name of material, don’t use part name or commodity (trade) name, please.
13/13